fix display wakeup
This commit is contained in:
4 files changed
+638
No files matched your search
@@ -0,0 +1,52 @@
|
||||
# Re-initialise the HDMI-0 TMDS link after every wake.
|
||||
#
|
||||
# A DPMS off/on cycle on its own leaves the LG's link untrained: the CRTC stays
|
||||
# programmed and the panel keeps HPD asserted, so the driver never retries and
|
||||
# the panel sits at "no signal" until the cable is replugged. Nothing queryable
|
||||
# distinguishes that from a healthy link -- xrandr, the driver's display masks
|
||||
# and /sys/class/drm all report fine either way, and X reports the target mode
|
||||
# whether or not the panel actually locked -- so the link is re-initialised
|
||||
# unconditionally on wake, and the only real check is looking at the panel.
|
||||
#
|
||||
# Recovery is an ascending pixel-clock ladder, not a single hop. The transmitter
|
||||
# will not train straight to 4K60 (594MHz, against this port's 600MHz maximum);
|
||||
# the panel lights up and drops again. It will climb: disable the CRTC, then
|
||||
# 1080p @148.5MHz, then 4K30 @297MHz, then 4K60 @594MHz. The middle rung must be
|
||||
# the slowest mode at the target resolution -- picking the fastest one below the
|
||||
# target selects 593.41MHz, the 59.94Hz near-twin, and the climb does nothing.
|
||||
#
|
||||
# Wake is detected from the X screensaver idle counter, NOT a DPMS Off->On edge:
|
||||
# user input resets the idle counter but not the power level, and whoever blanked
|
||||
# the screen may restore the level before the next poll, so testing it on the
|
||||
# edge races and never matches. The level is latched instead, as evidence that
|
||||
# the panels slept at some point during the idle.
|
||||
#
|
||||
# Implemented as a binary speaking X11 directly rather than a shell loop around
|
||||
# xset(1)/xrandr(1): the poll loop then spawns no processes at all, which keeps
|
||||
# it out of execsnoop, and it never issues an xrandr --query, which on this
|
||||
# driver forces a full DFP re-probe.
|
||||
{ config, lib, pkgs, ... }:
|
||||
|
||||
let
|
||||
hdmi-relink = pkgs.callPackage ./package.nix {};
|
||||
in
|
||||
{
|
||||
# also exposed for running by hand after a manual layout change
|
||||
environment.systemPackages = [ hdmi-relink ];
|
||||
|
||||
systemd.user.services.hdmi-relink = {
|
||||
description = "Re-initialise HDMI-0 TMDS link on wake";
|
||||
partOf = [ "graphical-session.target" ];
|
||||
after = [ "graphical-session.target" ];
|
||||
wantedBy = [ "graphical-session.target" ];
|
||||
# XAUTHORITY is already exported to the user manager by the session
|
||||
environment.DISPLAY = ":0";
|
||||
serviceConfig = {
|
||||
# ExecStart, not `script`, so systemd execs the binary directly
|
||||
# instead of wrapping it in a generated shell script
|
||||
ExecStart = "${lib.getExe hdmi-relink} --watch";
|
||||
Restart = "on-failure";
|
||||
RestartSec = 5;
|
||||
};
|
||||
};
|
||||
}
|
||||
Reference in new issue
Block a user