# Re-initialise the HDMI-0 TMDS link after every wake. # # A DPMS off/on cycle on its own leaves the LG's link untrained: the CRTC stays # programmed and the panel keeps HPD asserted, so the driver never retries and # the panel sits at "no signal" until the cable is replugged. Nothing queryable # distinguishes that from a healthy link -- xrandr, the driver's display masks # and /sys/class/drm all report fine either way, and X reports the target mode # whether or not the panel actually locked -- so the link is re-initialised # unconditionally on wake, and the only real check is looking at the panel. # # Recovery is an ascending pixel-clock ladder, not a single hop. The transmitter # will not train straight to 4K60 (594MHz, against this port's 600MHz maximum); # the panel lights up and drops again. It will climb: disable the CRTC, then # 1080p @148.5MHz, then 4K30 @297MHz, then 4K60 @594MHz. The middle rung must be # the slowest mode at the target resolution -- picking the fastest one below the # target selects 593.41MHz, the 59.94Hz near-twin, and the climb does nothing. # # Wake is detected from the X screensaver idle counter, NOT a DPMS Off->On edge: # user input resets the idle counter but not the power level, and whoever blanked # the screen may restore the level before the next poll, so testing it on the # edge races and never matches. The level is latched instead, as evidence that # the panels slept at some point during the idle. # # Implemented as a binary speaking X11 directly rather than a shell loop around # xset(1)/xrandr(1): the poll loop then spawns no processes at all, which keeps # it out of execsnoop, and it never issues an xrandr --query, which on this # driver forces a full DFP re-probe. { config, lib, pkgs, ... }: let hdmi-relink = pkgs.callPackage ./package.nix {}; in { # also exposed for running by hand after a manual layout change environment.systemPackages = [ hdmi-relink ]; systemd.user.services.hdmi-relink = { description = "Re-initialise HDMI-0 TMDS link on wake"; partOf = [ "graphical-session.target" ]; after = [ "graphical-session.target" ]; wantedBy = [ "graphical-session.target" ]; # XAUTHORITY is already exported to the user manager by the session environment.DISPLAY = ":0"; serviceConfig = { # ExecStart, not `script`, so systemd execs the binary directly # instead of wrapping it in a generated shell script ExecStart = "${lib.getExe hdmi-relink} --watch"; Restart = "on-failure"; RestartSec = 5; }; }; }